• LFS 210

    Designed for tension/compression, the Model LFS 210 is a high alloy tool steel strain gage load cell, constructed of nickel plated alloy steel or double plated chrome. Compact form and high precision are combined in the S-shaped design, achieving an accuracy of ±0.05%. Tapped accessory holes accommodate eyebolts, rod ends and load buttons for compression or tension.

  • LFS 230

    The model LFS 230 Universal Beam is designed for tension/ compression force measurements and features the proven bending beam construction for high performance at a low cost. Adverse side loads which would destroy "can" type load cells are tolerated by the LFS 230. Matched outputs are also available.

  • LFS 242 Product Image

    The LFS 242 is a low range load cell, which provides high accuracy for weighing or force measurement applications. This cell is made of aluminum, but is durable enough for most I applications. The LFS 242 has 10-32 UNC threads on both ends of the transducer for easy installation.

  • Sealed Beam

    The LFS 250 is a dual cantilevered, hermetically sealed, stainless steel beam load cell. This cell is designed for both tension and compression and harsh environments, where other cells will not work. It is capable of withstanding significant sideload without physical damage. The LFS 250 uses proven sealing techniques that provide superior waterproofing and combines welded metal seals and a water block cable entry system which will resist leakage.

  • LFS 260-262 product image

    The LFS 262 is a tension/compression low profile load cells. This compact unit offers a unique combination of versatility in a wide range of capacities and a rugged construction. The 150 to 300 pound ranges are constructed of 2024 aluminum, while the larger capacities are constructed of stainless steel. The threaded end allows for easy mounting. LFS 262 may be purchased with a connector on the body of the cell.

  • LFS 270 product image

    The LFS 270 is a miniature tension/compression load cell. This load cell offers a unique combination of compact size, with a high overload capacity rating of 1000% of full scale. The LFS 270 has two threaded #4-40 mounting holes on either end for easy installation.

    Important Note: We will be transitioning all of the ranges from a 4-40 Thread to a Metric thread of M3x0.5. Currrently the LFS 270 100g and 250g are now only available in with the metric thread.

  • LFS 270-UW Submersible Miniature S-Beam Load Cell

    The LFS 270-UW is a submersible version of the popular LFS 270 load cell. It features the same compact size and adaptability, but also can be used submerged in a variety of liquids. Like its terrestrial counterpart, the LFS 270-UW is a miniature tension/compression load cell. Using metal foil strain gauge technology, one of its unique features is its extremely high overload capacity - 1,000% of rated output. So it's perfect for applications where total force may not be clear before measurement. Smaller than a postage stamp and made of sturdy aluminum (stainless steel for higher load models), the sensor's built-in overload protection keeps it safe in any test situation. The cell has two treaded #4 - 40 mounting holes at either end, making installation in any setting a snap. This load cell is popular in the automotive, aerospace and automation industries for such applications as fuel tank fullness measurements. But it is adaptable to any application where loads must be measured in liquid environments.

  • LGP 310

    Low profile "pancake" type cells are engineered to measure loads from 5 to 500,000 pounds. The tension/compression LGP 310 is designed with a threaded hole running through the center of the cell. The LGP 310 utilizes two stabilizing diaphragms, which are welded to the sensing member to reduce off-center and side-loading effects. A load button may be desirable when using in compression or a pull plate when using in tension. This model must be used on a flat, smooth surface to achieve rated specifications. This unit can be hermetically sealed for added durability. Options available with this unit include: 0-5 Vdc, 4-20 ma output, fatigue rating, high/low temperature compensation and ultra precision accuracy.

  • LGP 312 Pancake Load Cell

    The compression-only model LGP 312 has a load button which is fixed as an integral part of the load cell and cannot be removed or changed. This model must be used on a flat smooth surface to achieve rated specifications. The LGP 312 achieves impressive linearity, hysteresis and repeatable specifications for applications which include; tube mills, extruding processes and weighing. A variety of options are available including: 0-5 Vdc, 4-20mA output, fatigue rating, high/low temperature compensation, hermetically sealed and ultra precision accuracy.

  • LGP 320 Pancake Thin

    The LGP320 is a low profile compression load cell constructed of stainless steel and designed to be used in applications where high accuracy is required. This cell has three threaded mounting holes and an integral load button. The LGP 320 is available as a dual bridge model and may be hermetically sealed for underwater applications. For best results, the LGP 320 should be mounted on a hard, flat, smooth surface. Some ranges are stocked for quick delivery.

  • LGP 380

    The LGP 380 is a tension/compression, low profile, shear web designed load cell, which has brought new benefits and broader applications for the user. The resistance to extraneous forces, bending, torsion, side loads, produces high fatigue life and permits less stringent mounting alignment and reduces the possibility of reading errors. The shear webs are contoured in a manner to produce peak strain only under the gage grids. The gage tabs, bridge wiring, and compensation are located in low stress areas. The gages themselves are constructed of high endurance alloy to specified standards of high accuracy and fatigue operation on a shear web. The LGP 380 is shipped with a base plate which is used to ensure the user gets the highest accuracy.

  • LGP 382

    The LGP 382 is a compression-only, low-profile, shear web designed load cell, which has brought new benefits and broader applications for the user. The resistance to extraneous forces, bending, torsion, side loads, produces high fatigue life and permits less stringent mounting alignment and reduces the possibility of reading errors. The shear webs are contoured in a manner to produce peak strain only under the gage grids. The gage tabs, bridge wiring, and compensation are located in low stress areas. The gages themselves are constructed of high endurance alloy to specified standards of high accuracy and fatigue operation on a shear web. The LGP 382 is shipped with a base plate which is used to ensure the user gets the highest accuracy.

  • LGP 390 Low Profile

    The LGP 390 is a tension/compression load cell for applications requiring high accuracy and long life. Designed with a threaded thru-hole in the center and mounting holes on the outside diameter, the LGP 390 may be used for applications requiring a cell to last for a billion cycles. The LGP 390 is available with a dual bridge or it may be hermetically sealed for underwater applications. To achieve best results this cell should be mounted on a hard flat smooth surface.

  • LKCP 410

    Models LKCP 410 load cells are compression in ranges 0-25 up to 0-50,000 lbs.  For use in production or testing applications that require budget friendly pricing.  (i.e. press calibration). This model achieves a minimum non-linearity of ± 0.5% full scale. Precision gaging techniques  and a stainless steel construction provide excellent long-term stability and reliability under severe operating conditions.

  • LKCP 414

    Models LKCP 414 load cells are designed for prodution or testing applications and can be used for tension and compression up to 10,000 lbs. This model achieves a minimum non-linearity of ± 0.15% full scale. Precision gaging techniques  and a stainless steel construction provide excellent long-term stability and reliability under severe operating conditions.

  • LKCP 472_473

    Models LKCP 472 and 473 are donut shaped load cells, smallest in our series.  Differences are ID of hole, OD, and height. Economical through-hole design.  Applications include bolt force measurement,leg or post mount. These models are used in compression applications.  For optimum performance these models must be mounted between load surfaces which are flat and parallel. The extremely low profile and compact design, combined with their all stainless steel construction and environmental protection, have a proven reliability in tough industrial applications

  • LKCP 474

    LKCP 474 Donut Load Cell, Ranges from 0-100 Lbs to 0-5000 Lbs -Model LKCP 474 is a donut shaped load cell. This series has a slightly larger range,  which changes the ID, OD and Height.  The through-hole design is also used in bolt force measurement, post or leg mount and rolling mill systems. These models are used in compression applications.  For optimum performance these models must be mounted between load surfaces which are flat and parallel. The extremely low profile and compact design, combined with their all stainless steel construction and environmental protection have a proven reliability in tough industrial applications.

  • lkcp475

    Model LKCP 475 is a donut-shaped load cell, and is an economical answer for applications requiring a thru-hole design. Such applications include bolt force measurement, post or leg mount and rolling mill systems. These models are used in compression applications. For optimum performance these models must be mounted between load surfaces which are flat and parallel. The extremely low profile and compact design, combined with their all stainless steel construction and environmental protection have a proven reliability in tough industrial applications.

  • lkcp475

     Model LKCP 476 is a donut shaped load cell with larger ranges and capacitites, which corresponds with larger ID, OD and Height dimensions.  It is an inexpensive answer for applications for use in applications include bolt force measurement, post or leg mount and rolling mill systems. These models are used in compression applications.  For optimum performance these models must be mounted between load surfaces which are flat and parallel. The ex tremely low profile and compact design, combined with their all stain less steel construction and environmental protection have a proven reli ability in tough industrial applications.

  • LKCP 477

    Model LKCP 477 is a donut shaped load cell, and has a consistent low profile of 1 inch and OD of 3 inches through out all range.  It is the solution for applications that have limited space. Similar to our other donut series units, it is for use in areas including bolt force measurement, post or leg mount and rolling mill systems. These models are used in compression applications.  For optimum performance these models must be mounted between load surfaces which are flat and parallel. The extremely low profile and compact design, combined with their all stainless steel construction and environmental protection have a proven reliability in tough industrial applications.

  • lkcp 478

    Model LKCP 478/479/480/481 are donut shaped load cells with varying ID,OD and Height dimensions.  Mounting and space restriction help dictate when this unit is the best choice.  Used for applications requiring a through-hole design. Bolt force measurement, leg or post mount are areas where these models are used in compression  applications. For optimum performance these models must be mounted between load surfaces which are flat and parallel. The extremely low profile and compact design, combined with their all stainless steel construction and environmental protection have a proven reliability in tough industrial applications. Less

  • lkcp482

    Model LKCP 482/483/484/485 are donut shaped load cells that are for applications requiring a large through-hole design with limited space. Because of their rugged construction and design these load cells are ideal for applications such as loading  forces on bolts and rolling mill applications. Stainless steel construction and environmental protection have a proven reliability in tough industrial applications

  • LPM 510

    Models LPM 510 (compression only) subminiature load cells are designed to measure load ranges from 50 grams to 1000 pounds with a high frequency response rate. The subminiature dimensions, including diameters from 0.38" to 0.75" and Heights of 0.13" to 0.25" allow these units to be easily incorporated into systems having limited space. A small (1.0" long x 0.08" thick circuit board on ranges 50 g - 1000 g) is included in each load cell’s lead wire cable for temperature compensation.


    NOTE: Please specify LPM 510A or LPM 510B when requesting a quote or ordering. For more information on the differences between LPM 510A and LPM 510B (cabling, wiring), please review the full specifications carefully.(Ranges 150G to 1000G lbs only available in LPM 510A style.)

  • LPM 512

    Models 512 (tension/ compression) subminiature load cells are designed to measure load ranges from 50 grams to 1000 pounds with a high frequency response rate. The subminiature dimensions, including diameters from 0.38" to 0.75" and Heights of 0.29" to 0.38" allow  these units to be easily incorporated into systems having limited space with thread rods on each end. A small (1.0" long x 0.08" thick) circuit board is included in each load cell's lead wire cable for temperature compensation.

  • LPM514

    The LPM 514 is a subminiature threaded stud load cell, which is designed to be incorporated into areas having limited space. The LPM 514 measures compressive forces axially through the threaded stud, which also provides for easy mounting. Its compact and stainless steel construction was designed to handle ranges from 10 to 50 pounds, but Cooper can build additional capacities upon request.

  • LPM530

    The LPM 530 is a precision miniature force cell which measures both tension and compression load forces of 50 grams to 10,000 pounds. These models are highly accurate, rugged miniature load cells. Model LPM 530's welded, stainless steel construction utilizes a "triple" stack design to reduce the effects of off-axis loads. The internal construction assures excellent long term stability for ranges of 1000 grams and above. All of the basic engineered concepts of larger load cells, such as precision calibration, stabilizing diaphragms, temperature compensation, etc., are built into this model.

  • LPM630

    The LPM 630 is designed to measure a wide variety of physical parameters such as pressure or acceleration. The anodized aluminum housing is screwed on the chrome plated front end which comes with a pair of locking nuts for convenient clamping on the mounting bracket. The gaging tip is made of hi-tensile 17.4 PH stainless steel in order to match the gaged part hardness wherever necessary. Two basic models are available: the ± 30 gram unit able to operate in both tension and compression and the 0-60 gram unit which is compression only.

  • lqb610

    The model LQB 610 Shear Beam Load Cell is designed for use in low profile applications. The LQB 610 is environmentally protected with waterproof sealing and nickel plated high alloy tool steel. Loads are applied via load button above the beam or suspended on a wire rope assembly below the beam. The LQB 610 is most useful for high precision weight and force measurement where excellent performance, extreme ruggedness and low profile are important requirements.

  • LQB 620 - Single Point Load Cell

    The LQB 620 is constructed of stainless steel and designed to perform in harsh, high shock load environments. This makes the LQB 620 ideal for platform scales, packaging and process weighing equipment.

  • LRCN 710

    The model LRCN 710 ultra precision load cell provides superior scale quality and performance standards with an impressive ±0.08% accuracy. The cantilever beam design is combined with hermetically sealed stainless steel construction for high precision and reliability in harsh environments. Female threads facilitate tension and compression measurements for universal force and weighing applications.

  • LRCN 730

    The model LRCN 730 is a high precision compression type load cell widely used throughout the weighing industry for truck, tank and track scales. It combines hermetically sealed stainless steel construction with an extremely high accuracy for precise weighing and force measurements in harsh environments. A rounded load button on the top ensures axial loading.

  • LTL750

    The LTL 750 allows easy mounting for tension loads up to 50 times the structural strength capacity. This one piece design allows for outdoor installation. The LTL can be used with the MasterLink 3000 for wireless application.

  • LTR810

    Models LTR 810 Rod End In Line load cells are designed to provide excellent off-axis stability. This design allows the gages to be mounted on the closest possible center line of the cell and permits excellent long-term stability. Each unit is constructed of stainless steel and is hermetically sealed for use in corrosive and very high humidity environments. Model LTR 810 has male threads, while model LTR 812 has female threads. To achieve additional stability and ruggedness the threads are machined as an integral part of the load cell.

  • LTR 812

    Models LTR 812 Rod End In Line load cells are designed to provide excellent off-axis stability. This design allows the gages to be mounted on the closest possible center line of the cell and permits excellent long-term stability.  Model LTR 810 has male threads, while model LTR 812 has female threads. To achieve additional stability and ruggedness the threads are machined as an integral part of the load cell. Each unit is constructed of stainless  steel and is hermetically sealed for use in corrosive and very high humidity environments.

  • LTR 820 - Steel Threaded Rod

    The LTR 820 is a low cost threaded rod used for general purpose force measurement applications. All models are built using high strength steel alloy. A durable aluminum jacket offers protection at the gaged area and provides strain relief for the cable. These models will allow a 150% of capacity overload.

  • LTW 650 CMYK

    The model LTW 650 is ideal for Tank or Bin weighing applications requiring high accuracy from mid-range to higher capacities.  This double ended shear beam design adds stability in higher profile tanks for hoppers.   The LTW 650 is constructed of high quality alloy tool steel to provide maximum protection against adverse and impact loads. This weighing assembly is suitable for installation  in hazardous locations, where Factory Mutual approval is required. Also available in stainless steel, for harsh wash down environments

  • LTW 652

    The model LTW 652 is ideal for Tank or Bin weighing applications requiring high accuracy in lower capacity ranges.  The single ended shear beam design, the LTW 652 is constructed of high quality alloy tool steel to provide maximum protection against adverse and impact loads. This weighing assembly is suitable for installation  in hazardous locations, where Factory Mutual approval is required. Also available in stainless steel, for harsh environments.

  • Calibration and Customization Services

    Cooper Calibration Services