The ELF is a paper thin force sensor, which is designed to be used in applications between surfaces too closely spaced for conventional load cells. The flexiforce system comes complete with a module that plugs into the serial port on the PC, and easy to use software, which allows you to calibrate the system to any of 3 sensors. The 3 sensors come in ranges of 1-25 lbs, 25 to 150 lbs and 150 to 1000 lbs. The sensors may be calibrated via the software for the exact range you need. The ability to apply a known load during calibration will greatly increase the accuracy of the system. The Software provides the user with digital and analog readouts, plus a strip chart and bar graph display. The software allows the user to collect, record and play back data. The software is Windows 95/98/ME/2000/ XP compatible.
  • Paper thin
  • Economical
  • Plugs into existing serial port
  • Software included
Unit of Measure

Specifications

Load Range - lb.

N/A 1 to 1000

Linearity

N/A <± 5 %

Hysteresis

N/A <4.5 %

Repeatability

N/A <± 2.5 %

Material

N/A Mylar Film

Temperature Range

N/A 15 to 140 °F

Output

N/A 5 Meg ohms to 20k ohms

Excitation

N/A 1 V Vdc

Bridge Resistance

N/A N/A

Safe Overload

N/A 25 % of Capacity

Cable

N/A 10 ft. Inch

Thickness

N/A 0.005 Inch

Length

N/A 9.000 Inch

Width

N/A 0.55 Inch

Active Sensing Area dia.

N/A 0.375 Inch

Note

N/A For Dimensions see PDF full specifications